Newbie from Iowa
Thread Starter
Registered User
Joined: Jan 2009
Posts: 49
Likes: 0
From: Mason City, Iowa
Newbie from Iowa
Glad to be a part it. I have a 92 dodge 4wd that is stock other than the pump was turned up 10% when it was rebuilt a couple yrs ago. It has stock 3in exhaust, no muffler but I put in a straight thru resonator to take the hard edge off. I pull a 30ft fithwheel and a 18ft fishing boat and it works the heck out of it. I ordered a 3200 gov. spring. Am going to order a new fuel pin. From what I have read the Denny T is the way to go and I understand I can get in touch with him here. I have no boost or egt gauges. My question is, will this give me enough power and what will my egt's do ? Thanks.
Administrator
Joined: Mar 2002
Posts: 8,311
Likes: 52
From: Holly Ridge, N.C.
Glad to be a part it. I have a 92 dodge 4wd that is stock other than the pump was turned up 10% when it was rebuilt a couple yrs ago. It has stock 3in exhaust, no muffler but I put in a straight thru resonator to take the hard edge off. I pull a 30ft fithwheel and a 18ft fishing boat and it works the heck out of it. I ordered a 3200 gov. spring. Am going to order a new fuel pin. From what I have read the Denny T is the way to go and I understand I can get in touch with him here. I have no boost or egt gauges. My question is, will this give me enough power and what will my egt's do ? Thanks.
92 Bob:
Welcome to the website Sir! If you will P.M. DTR member wannadiesel he can also help you out with your 1st Gen. He owns a 1st Gen also and spends alot of time in the First Gen Forums helping the Members there.
---------
John_P
Thread
Thread Starter
Forum
Replies
Last Post
doodah
Natl. and Regional Chapters / Special Events
19
May 2, 2005 10:57 PM