New from Missouri
#1
New from Missouri
Hi im new to the site and have been learning all I can about my 91 cummins. Im currently havin problems with my serpentine belt slightly jumpin off the fan pulley one rib towards the motor and shreding the belt slowly. Wondering what I should replace first.
#2
Registered User
Join Date: Nov 2002
Location: near Magnolia, Tx.
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Welcome To Dtr !!!
Good to see another Missourian on the DTR !! Can't help you much with your 91 ... but we have a few sharp fellas in our local chapter (MODTR-30) that might could give you a hand. Check out the chapter threads ... drop a post and hopefully we'll get a chance to meet you !!
Cheers,
PISTOL
Cheers,
PISTOL
#6
Administrator
old silver:
When you have some time, take a minute to fill out the "signature area" below your name with such info as: Yr., Make, Model, Mods etc. of your truck.
Thanks.
When you have some time, take a minute to fill out the "signature area" below your name with such info as: Yr., Make, Model, Mods etc. of your truck.
Thanks.
#7
Registered User
Join Date: Dec 2006
Location: blue springs MO
Posts: 80
Likes: 0
Received 0 Likes
on
0 Posts
Welcome to DTR and like said above check out the missouri chapter. Have you checked all of your pullies with the belt off. Make shure none of them are bent or wobble.
Trending Topics
#8
DTR's Night Watchman & Poet Laureate
Welcome Aboard Old Silver!!!!! very happy to see another First Gen owner in the crowd... I've been out numbered!
on your pulley, odds are its the tensioner pulley that is worn out, its not uncommon... that will cause the belt to track towards the engine and cut it.
on your pulley, odds are its the tensioner pulley that is worn out, its not uncommon... that will cause the belt to track towards the engine and cut it.
Thread
Thread Starter
Forum
Replies
Last Post
Lary Ellis (Top)
Natl. and Regional Chapters / Special Events
9
01-12-2007 11:51 AM
Bobcat698
Performance and Accessories 2nd gen only
18
08-03-2006 09:23 PM