Hello from CA. Central Valley
#1
Hello from CA. Central Valley
Hello eveyone, I have been monitoring the forum for awhile, but I have not intro myself. Well I am from Sunny Central Valley CA. I have a 2005 Dodge Diesel 2500 4 door short bed. I have about 42,000 miles on it. It still has the stock Michelan tires.
My mods are as follows: K&N cold air system and two inch leveling kit.
My Goals for my vehicle are: Wheels, tires, and programer. For the wheels I am looking at 17" or 18" and tires 31 to 33. I don't want to go any higher than the leveling kit.
For the programer I am looking at a plug in model. I just want better performance and fuel economy. Any suggestions?
My mods are as follows: K&N cold air system and two inch leveling kit.
My Goals for my vehicle are: Wheels, tires, and programer. For the wheels I am looking at 17" or 18" and tires 31 to 33. I don't want to go any higher than the leveling kit.
For the programer I am looking at a plug in model. I just want better performance and fuel economy. Any suggestions?
#2
Registered User
Join Date: Jul 2007
Location: manteca ca
Posts: 813
Likes: 0
Received 0 Likes
on
0 Posts
whats up manteca native
if you want to improve millage and not get stuck into buying a bunch of exp mods i recomend something from bullydog the smarty is amazing but you will find yourself wanting to use it on the higher levels and that only leads to a fully built tranny and tubos, sticks and so on.
#3
Registered User
Welcome.
Although not a "Manteca Native", I moved here with my family in 1955 and graduated from the only high school at the time in 1960.
Watch for my Inferno Red stocker 4x4.
Dan
Although not a "Manteca Native", I moved here with my family in 1955 and graduated from the only high school at the time in 1960.
Watch for my Inferno Red stocker 4x4.
Dan
#5
Registered User
Dont forget about gauges, EGT, fuel pressure and boost. If your gonna pull any then also a tranny temp gauge. With a leveling kit you should be able to fit 35's or 315's fine.
Thread
Thread Starter
Forum
Replies
Last Post
Danchew6.7Mega
3rd Gen Engine and Drivetrain -> 2007 and up
4
10-19-2007 04:10 PM