HELP! If you have an EMERGENCY situation with your truck, or you need IMMEDIATE technical help, use this board.

PLEASE HELP..Trying to install Trans Guage

Thread Tools
 
Search this Thread
 
Old Apr 30, 2006 | 01:52 PM
  #1  
DieselBoost's Avatar
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 14
Likes: 0
From: Texas
PLEASE HELP..Trying to install Trans Guage

Hey guys please help........I have an 02 Dodge QCLB with 6spd and I thought it would be easy to hook up Trans Temp sensor...But Ihave NO place to hook up Temp sensor???????ANY IDEAS GUYS? Please Help?
Reply
Old Apr 30, 2006 | 02:08 PM
  #2  
RCW's Avatar
RCW
Registered User
 
Joined: Jul 2002
Posts: 1,440
Likes: 0
I removed my driver's side PTO plate, drilled it, and welded in a fitting for the temperature gauge.
Reply
Old Apr 30, 2006 | 02:31 PM
  #3  
DieselBoost's Avatar
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 14
Likes: 0
From: Texas
Well...Iwashoping there was another way of doing it....NO welder here.....Iguess there is noplace to put the existing sending unit in the tranny right?
Reply
Old Apr 30, 2006 | 03:13 PM
  #4  
Racer9's Avatar
Registered User
 
Joined: Dec 2005
Posts: 431
Likes: 0
From: Erie Pa
Unscrew the drain plug, use whatever bushinge are needed. But, why do you need a temp gauge in a manual?
Reply
Old Apr 30, 2006 | 09:21 PM
  #5  
DieselBoost's Avatar
Thread Starter
Registered User
 
Joined: Mar 2006
Posts: 14
Likes: 0
From: Texas
Thanks for everyones help....I do a lot of pulling so I thought the temp guage we be very handy.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Roperteacher
HELP!
4
Dec 16, 2007 07:34 PM
the496rocket
24 Valve Engine and Drivetrain
2
Oct 12, 2007 09:04 AM
RedRockRancher
HELP!
3
Jul 18, 2007 05:56 PM
SuperiorRam
1st Gen. Ram - All Topics
12
Mar 15, 2007 03:10 AM
mitch@jc'sCTD
Performance and Accessories 2nd gen only
3
Jun 8, 2006 07:00 AM




All times are GMT -5. The time now is 10:18 AM.