overdrive not working?
Registered User
Joined: Jan 2002
Posts: 275
Likes: 0
From: Deering NH
Re:overdrive not working?
sounds like your OD off button is not working 2100 is the right RPM for that speed, the only other thing i'm thinking is it has a saftey not to go out of OD because of the speed it would probably redline the engne.<br><br>DRecu!<br><br>BTW why are you trying to take OD off @ 70 MPH? 
Guest
Posts: n/a
Re:overdrive not working?
With my truck and 3.54 rear @ 70 mph Im at 1850 rpm or so. If your runnning 2100 with the same set up - it just might be possible your torque convertor is not locking up.<br><br>You should feel your TC lock up in third gear. While in 3rd yu will notice a drop in rpm while accellrating after the shift change. That is when the TC is locking up.<br><br>I say this because when I lost line pressure I was running about 2100 rpm in OD.
Thread
Thread Starter
Forum
Replies
Last Post
Sleigher
12 Valve Engine and Drivetrain
11
May 4, 2017 02:12 PM
Firstgenfanatic
1st Gen. Ram - All Topics
15
Apr 3, 2008 10:23 AM
Drafter
3rd Generation Ram - Non Drivetrain - All Years
4
Jun 20, 2003 04:09 PM
