One more on VP44...

Reply Subscribe

Thread Tools

Search this Thread

Sep 2, 2005 | 03:55 PM

Haulin_in_Dixie

Thread Starter

Registered User

Joined: Nov 2001

Posts: 4,199

Likes: 1

From: Branchville, Alabama

One more on VP44...

Has anyone heard of a VP44 messing up on one cylinder? I have not but I hate to pull the head if the VP is the culpret.

Sep 2, 2005 | 08:38 PM

pind

Registered User

Joined: Jul 2004

Posts: 1,252

Likes: 52

From: Whitehorse, cultural hub of the universe..

The VP44 can go goofy on one cylinder. if you have the proper scan tool, you can do a cylinder cutout test to see which is not working properly. I have done this test on my 01 when I suspected something was amiss.

Snap-On MODIS will do this test, as will Insite.

Good luck on talking to the pump.

Sep 2, 2005 | 08:51 PM

Marine

Registered User

Joined: Aug 2001

Posts: 2,058

Likes: 6

From: Canuckistan

They did this at the dealer for me when I was complaining of high trans temps. It is amazing what you can get the tech's to do on a road trip. This was before the 36,000 mile warranty was up, and they went through stuff I never even asked them to do.
Mike