I have "no BuS" in odometer, no guages either, no overhead display, just CCD or something like that.
I've searched and it seems I have a bad ground somewhere, like the instrument cluster. (gag)

However, the truck starts up and drives just fine.
Is there any problem driving it like this while I look for the problem? I have lights, radio, etc.. just no guages..

 

I'm overcome by all of the responses on this topic, anyways, the cluster is good, so now I need to find out where all of the feeding sensors are so I can individually unplug them, until I isolate the bad one.
Any help on this one?

 

slugg, most of us havent probably dealt with(thank god) this issue. no clue where to point you. sorry

 

https://www.dieseltruckresource.com/...d.php?t=130208

just read this on another thread. do some reading, may help you out.
chris

 

you were overcome with all the responses, now 2 in 15 minutes and you havent responded. shame on you.

 

lol, thanks

Actually I have read every thread on this subject I could find in this sites history, along with Diesel ram, Fritz, and TDR..
*sigh*
Actually, my wife thinks I'm having an affair with some woman who has a diesel truck I spend so much time on these sites!

I'm just getting ready to do some mild bombing and this has to happen...
I only want a juice w/Attitude (or something that has a monitor)

 

if i can find the cd rom with the shop manual i got. ill try to see if i can help you with the problem.. but my big problem is its in a box that i havnt unpacked from my move! but ill give it a look .