Broke a Cylinder Head Bolt!
#1
Registered User
Thread Starter
Join Date: Jun 2006
Location: Thamesford, Ontario Canada
Posts: 1,288
Likes: 0
Received 0 Likes
on
0 Posts
Broke a Cylinder Head Bolt!
Hey Guys,
Today I decided to re-torque my head bolts. Long story short, one of the bolts broke as I was torquing it my own fault though, should have stopped. But anyways, does anyone have the pages from a manual, or the torque specs for the valve rockers, cylinder head bolts, etc, etc? I'm going to get/order a new head gasket and OEM bolts on tuesday then R&R what I need to!
Thanks for the help!
Today I decided to re-torque my head bolts. Long story short, one of the bolts broke as I was torquing it my own fault though, should have stopped. But anyways, does anyone have the pages from a manual, or the torque specs for the valve rockers, cylinder head bolts, etc, etc? I'm going to get/order a new head gasket and OEM bolts on tuesday then R&R what I need to!
Thanks for the help!
#3
Registered User
Thread Starter
Join Date: Jun 2006
Location: Thamesford, Ontario Canada
Posts: 1,288
Likes: 0
Received 0 Likes
on
0 Posts
I don't want to wait to get studs in right now. It would be over a week to get them and don't want to wait until after the weekend. Next year I'll be getting studs and o-rings done. I've tried locating info on the web but I haven't had any luck. If anyone has the cylinder head specs for everything needed in a head R&R that would be awesome!
Thread
Thread Starter
Forum
Replies
Last Post
cLAYH
3rd Gen Engine and Drivetrain -> 2003-2007
2
10-11-2008 11:07 PM