% of WMO in a CRD
09-22-2008, 09:08 PM
#1
Registered User
Thread Starter
Join Date: Mar 2007
Location: Marana, Arizona
Posts: 341
Likes: 0
Received 0 Likes
on
0 Posts
% of WMO in a CRD
what percentage of WMO can be run in '07 CRD? It runs just fine on 5 gallons WMO mixed with 30 gallons #2. Does anybody know definitively how high of a percentage of WMO diluted into the fuel, is safe to run in a CR? Who here has run more than 5 gallons per tank in a Common Rail?
I know the P-pumped engines can run it straight, and the VP-44 can run it safely at 30% (and probably higher) but exactly how much in a Common Rail.... that is what I want to know.
I know the P-pumped engines can run it straight, and the VP-44 can run it safely at 30% (and probably higher) but exactly how much in a Common Rail.... that is what I want to know.
09-22-2008, 09:35 PM
#2
Registered User
Hey DD,
Member (DGT) over on the Oilburners.net is running a 50% WMO mixture. But he's also running water injection to keep the smoke down and the combustion chamber clean.
MikeyB
Member (DGT) over on the Oilburners.net is running a 50% WMO mixture. But he's also running water injection to keep the smoke down and the combustion chamber clean.
MikeyB
cool !
You Rock! 
Thread
Thread Starter
Forum
Replies
Last Post
