Cummins Conversions Discuss conversions here. For instance, if you want to put a REAL engine in a FORD, this is where you would talk about it!

1991 Dodge Ram 3500 diesel Cummins dually tail light issues

Old Feb 12, 2019 | 04:45 PM
  #1  
Travis Bradley's Avatar
Thread Starter
Registered User
 
Joined: Feb 2019
Posts: 3
Likes: 0
1991 Dodge Ram 3500 diesel Cummins dually tail light issues

No tail lights or running lights. Changed multi function switch, checked all fuses and bulbs. Have brake lights and blinkers and hazards work. Any ideas???? Need help
Reply
Old Feb 12, 2019 | 08:10 PM
  #2  
NJTman's Avatar
Registered User
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2010
Posts: 6,839
Likes: 1,683
From: Land of the Toxic Avenger
Originally Posted by Travis Bradley
No tail lights or running lights. Changed multi function switch, checked all fuses and bulbs. Have brake lights and blinkers and hazards work. Any ideas???? Need help
there are two disconnects , one on each side of the truck, up under the bed in the frame , behind each rear wheel. These disconnects get all funky inside. Find them, and use a test light to see if power is on the front harness, and not traveling across the connector
Reply
Old Feb 12, 2019 | 09:38 PM
  #3  
Travis Bradley's Avatar
Thread Starter
Registered User
 
Joined: Feb 2019
Posts: 3
Likes: 0
Originally Posted by NJTman
there are two disconnects , one on each side of the truck, up under the bed in the frame , behind each rear wheel. These disconnects get all funky inside. Find them, and use a test light to see if power is on the front harness, and not traveling across the connector
Thank you, I will try it tomorrow
Reply
Old Feb 13, 2019 | 01:06 PM
  #4  
NJTman's Avatar
Registered User
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Dec 2010
Posts: 6,839
Likes: 1,683
From: Land of the Toxic Avenger
Originally Posted by Travis Bradley

Thank you, I will try it tomorrow
I had the same problem you've described. I wound up having to bypass the connector with a separate wire because the connector had eroded over time.

Good luck.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
tack514
3rd Generation Ram - Non Drivetrain - All Years
9
Apr 18, 2019 08:46 PM
rmillett
3rd Gen All Products
4
May 24, 2016 03:16 PM
Pinkston
2nd Gen All Products
3
Feb 27, 2015 07:39 PM
JStevens85
2nd Gen. Dodge Ram - No Drivetrain
14
Aug 12, 2014 01:38 PM
ClawHammer
1st Gen. Ram - All Topics
5
Jan 7, 2004 01:31 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 01:26 PM.