Competition / Pulls / OffRoad You wanted it, well you got it. The competition and pulling forum. Please have your racing, pulling and other competition posts here. No East Coast vs. West Coast, and no flame wars!

looking for new charger for pulling in 2.6

Thread Tools
 
Search this Thread
 
Old Nov 14, 2008 | 01:42 PM
  #1  
CTD03's Avatar
Thread Starter
Registered User
 
Joined: Jul 2006
Posts: 485
Likes: 0
From: western,pa
looking for new charger for pulling in 2.6

Looking in to a new charger i want to pull in the 2.6 class and i am currently running a 2.5 charger.

i am running htt charger but i want to know whats the best or what guys really like to run

i am only worried cause i will be in hopefully high rpm well 4000- and i got 150-180 sticks in my truck and no water yet

so i read about the silver bullet but i heard it might not make the class unless you tell them to hold the 2.65

so really what turbo could i run??
Reply
Old Nov 14, 2008 | 02:34 PM
  #2  
haloman's Avatar
Chapter President
 
Joined: May 2002
Posts: 3,529
Likes: 0
Get a Custom built s400.
Reply
Old Nov 14, 2008 | 03:19 PM
  #3  
CTD03's Avatar
Thread Starter
Registered User
 
Joined: Jul 2006
Posts: 485
Likes: 0
From: western,pa
with these custom s400 what should i look for?
Reply
Old Nov 15, 2008 | 02:09 PM
  #4  
Kman9090's Avatar
Registered User
 
Joined: Feb 2004
Posts: 1,244
Likes: 0
From: St. Charles missouri
My brother had a few problems getting his silver bullet into the 2.6 class but they finally let him in. My buddy runs the scheid lighting 2.6 charger and really likes it. I kinda wish I would of went with the scheid lighting. Not many 2.6 classes let you run water yet but might change for next year. Really I think that the 2.5 would be enough for 4,000 rpms. I can rev to 4,000 rpms but usually down the track only pull about 3800 but you have a litle more fuel then me.
Reply
Old Nov 17, 2008 | 10:07 AM
  #5  
CTD03's Avatar
Thread Starter
Registered User
 
Joined: Jul 2006
Posts: 485
Likes: 0
From: western,pa
yes 2.5 might be enough but what i am i really missing in hp wise wish i could dyno the 2 turbos to see if it makes that much of a difference in the top end ??
Reply
Old Dec 3, 2008 | 08:07 AM
  #6  
RamNu2's Avatar
Registered User
 
Joined: Feb 2006
Posts: 508
Likes: 0
From: Vandalia, Il
Search for an S365. Thats what alot of guys are running. Call Fleece performance and tell them your intentions. From what I have heard they have good products.
Reply
Old Dec 3, 2008 | 09:39 AM
  #7  
RowJ's Avatar
Registered User
 
Joined: Apr 2004
Posts: 8,234
Likes: 1
From: Texas/Oklahoma Border
Is an S365 and an S300/66 the same thing?

RJ
Reply

Trending Topics

Old Dec 5, 2008 | 10:18 AM
  #8  
RamNu2's Avatar
Registered User
 
Joined: Feb 2006
Posts: 508
Likes: 0
From: Vandalia, Il
Yes your right after I posted lost my ability to access site to change it to S465. That is what I meant but typed wrong. Thanks for not being to harsh on me.
Reply
Old Dec 8, 2008 | 07:59 AM
  #9  
CTD03's Avatar
Thread Starter
Registered User
 
Joined: Jul 2006
Posts: 485
Likes: 0
From: western,pa
Originally Posted by RamNu2
Yes your right after I posted lost my ability to access site to change it to S465. That is what I meant but typed wrong. Thanks for not being to harsh on me.

i am looking hard to find that for sure guess i aint looking in the right spots
Reply
Old Dec 8, 2008 | 09:33 AM
  #10  
RowJ's Avatar
Registered User
 
Joined: Apr 2004
Posts: 8,234
Likes: 1
From: Texas/Oklahoma Border
Originally Posted by CTD03
i am looking hard to find that for sure guess i aint looking in the right spots
One in the classifieds!
https://www.dieseltruckresource.com/...t/22799/cat/12

RJ
Reply
Old Dec 13, 2008 | 03:54 PM
  #11  
torquet's Avatar
Registered User
 
Joined: Jul 2007
Posts: 98
Likes: 0
From: Danville, In
water cooled ball-bearing. call Scheids
Reply
Old Dec 16, 2008 | 05:56 AM
  #12  
jwb600's Avatar
Registered User
 
Joined: Jan 2006
Posts: 3,597
Likes: 0
From: Indiana
Originally Posted by RamNu2
Search for an S365. Thats what alot of guys are running. Call Fleece performance and tell them your intentions. From what I have heard they have good products.
from what ive heard they do alot of machining out a stock turbo housing and shove in a huge wheel to me thats not really worth a couple thousand and not really getting an aftermarket turbo. the guys that win these classes have real aftermarket turbos not just machined out housing. im not saying you are wrong either just stating the obvious. I would talk to wes wade about the 2.6 charger class because he does really well and won scheid so to me that says something
Reply
Old Dec 17, 2008 | 09:02 AM
  #13  
Sniper05's Avatar
Registered User
 
Joined: Aug 2007
Posts: 236
Likes: 0
I'm pretty sure that wes runs a scheid built charger!
Reply
Old Dec 30, 2008 | 03:12 PM
  #14  
JIT's Avatar
JIT
Registered User
 
Joined: Nov 2005
Posts: 617
Likes: 0
From: Tampa, Fl.
Custom S400.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Smokkin
1st Gen. Ram - All Topics
3
Feb 10, 2011 08:27 PM
Mike D
Performance and Accessories 2nd gen only
31
Mar 14, 2008 09:53 PM
74dart
Other
14
Feb 20, 2008 12:55 AM
Bobcat698
Performance and Accessories 2nd gen only
18
Aug 3, 2006 09:23 PM
ckennedy
24 Valve Engine and Drivetrain
9
Jan 26, 2006 07:43 PM




All times are GMT -5. The time now is 12:55 PM.