Dyno'ed again last weekend...
#1
Registered User
Thread Starter
Join Date: Oct 2007
Location: Clarkdale, AZ
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Dyno'ed again last weekend...
Well, after the dyno day at Dyno Chip, I was wanting to get on a loaded dyno to see what "real" torque numbers I could pull with my auto truck. Just so happened, last weekend was a dyno day in Showlow that I went to with some friends. Put down 455HP (2 more than at AZ Dyno chip), but 951 ft/lbs
I guess it goes to show the differences in loaded and unloaded dynos. I didnt run it, but the guy that ran it (I sat in the passenger seat to watch gauges), brought it to about 2300rpm and laid on it as the dyno loaded, dropped rpm to almost 1700. On 2 pulls it downshifted, but on one it stayed in 3rd lockup and thats when I hit the 951 ft.lbs, but the other two pulls werent far behind at about 930.
So, whats gonna be the next meet? Drag day? Maybe an afternoon at Speedworld would be a fun time...
I guess it goes to show the differences in loaded and unloaded dynos. I didnt run it, but the guy that ran it (I sat in the passenger seat to watch gauges), brought it to about 2300rpm and laid on it as the dyno loaded, dropped rpm to almost 1700. On 2 pulls it downshifted, but on one it stayed in 3rd lockup and thats when I hit the 951 ft.lbs, but the other two pulls werent far behind at about 930.
So, whats gonna be the next meet? Drag day? Maybe an afternoon at Speedworld would be a fun time...
Thread
Thread Starter
Forum
Replies
Last Post
Steven K
3rd Gen Engine and Drivetrain -> 2007 and up
4
06-04-2009 10:32 AM
bluechrome
3rd Gen High Performance and Accessories (5.9L Only)
6
07-01-2008 09:27 AM
TexasCTD
Competition / Pulls / OffRoad
2
07-10-2007 02:07 AM