View Poll Results: Which date is best for a spring dyno at AFI
April 11
1
5.00%
April 18
2
10.00%
May 9
4
20.00%
May 23
13
65.00%
Voters: 20. You may not vote on this poll
Spring Dyno at AFI Edmonton
04-25-2009, 04:46 PM
#92
The Guru
Join Date: Jan 2004
Location: Airdrie Canada
Posts: 6,589
Likes: 0
Received 0 Likes
on
0 Posts
I was just going from what my brother told me on his ride. We might scare him off with some of the bigger HP pulls. Mines not even fast anymore.
Kev, sounds like you got the D-max tuned up pretty good.
Kenny, what kinda of boost you pulling? I found that the wastegate on the garrett open at 28 psi, so I disconnected mine. Might help with the egt's and making more top end HP.
Kev, sounds like you got the D-max tuned up pretty good.
Kenny, what kinda of boost you pulling? I found that the wastegate on the garrett open at 28 psi, so I disconnected mine. Might help with the egt's and making more top end HP.
04-26-2009, 08:53 PM
#94
The Guru
Join Date: Jan 2004
Location: Airdrie Canada
Posts: 6,589
Likes: 0
Received 0 Likes
on
0 Posts
Kenny you're good to go. You should try a run with the wastegate blockin and see you boost and egt's number. I can't wait to see what kinda of number I'll pull for a just spare parts stock ride.
04-29-2009, 12:30 AM
#95
Registered User
Join Date: Aug 2001
Location: Fort St. John B.C. Canada
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
On a side note, the night of the 23rd there is UFC 98. 
Anyone want to go and have a few beer and watch some fights after the dyno? Or at least point me in the direction of a good place to watch.
Anyone want to go and have a few beer and watch some fights after the dyno? Or at least point me in the direction of a good place to watch.
04-29-2009, 02:13 AM
#96
Registered User
Join Date: Aug 2005
Location: Airdrie, Alberta
Posts: 7,780
Likes: 0
Received 0 Likes
on
0 Posts
If I'm not working, I'm down for that. I missed UFC 97. I would be disappointed, but sounds like Anderson Silva put on a pretty lousy show.
05-08-2009, 09:42 PM
#98
The Guru
Join Date: Jan 2004
Location: Airdrie Canada
Posts: 6,589
Likes: 0
Received 0 Likes
on
0 Posts
Bump - This is your two week warning and get your truck running for the dyno.
I'm pumped guys, sure beats that work thingy. I'm curious what I'm gonna pull. The truck feels strong for such a low power mod truck. Definately good use of the spray.
I'm pumped guys, sure beats that work thingy. I'm curious what I'm gonna pull. The truck feels strong for such a low power mod truck. Definately good use of the spray.
05-08-2009, 11:25 PM
#100
Registered User
Join Date: Aug 2001
Location: Fort St. John B.C. Canada
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
I have about 3/4 of everything out of my truck for engine mods. Another couple of hours and I should have the engine right out. A bit more of a chore then I thought it would be! I found the most frustrating part of engine removal is the electrical connections. Push here pull there pry on this bust the red tab here.... LOL I will still be attending even if I don't get the 98 going. Just take the 04.5 with its killer smarty jr! LOL
05-09-2009, 08:34 AM
#102
Pickin on the wrong admin...
Thread Starter
05-09-2009, 05:51 PM
#104
Registered User
Join Date: May 2005
Location: Edmonton,Alberta
Posts: 805
Likes: 0
Received 0 Likes
on
0 Posts
Woohoo, I finally got my speedometer calibrated for my 37s. Trucks shifts WAY better than before. I'm looking forward to see what it lays down on the dyno
05-09-2009, 06:29 PM
#105
Registered User
Join Date: Oct 2007
Location: Okotoks, AB
Posts: 1,716
Likes: 0
Received 0 Likes
on
0 Posts
i'm also planning on coming up. never been out before but have met a couple of the guys. i won't be running on the dyno, but i might bring one or two guys who would . . . .
i'm looking forward to it!
i'm looking forward to it!