First pass of the year.
First pass of the year.
Well street legals finally kicked off at castrol......managed too click off a pass. Went 12.92 @ 111.05 mph in the rowboat.
This was done with Smarty Beta 4.2, Silver62, and used a .046 shot of nitrous.
60' = 2.134
330' = 5.617
1/8 = 8.458 @ 86.23
1000' = 10.892
1/4 = 12.92 @ 111.05
Wanted too get a pass in with the TNT/R and a larger shot of nitrous, but with 1 hour line-ups, I will go back another day.
Video: http://www.youtube.com/watch?v=EUaJiykZ8j8
This was done with Smarty Beta 4.2, Silver62, and used a .046 shot of nitrous.
60' = 2.134
330' = 5.617
1/8 = 8.458 @ 86.23
1000' = 10.892
1/4 = 12.92 @ 111.05
Wanted too get a pass in with the TNT/R and a larger shot of nitrous, but with 1 hour line-ups, I will go back another day.
Video: http://www.youtube.com/watch?v=EUaJiykZ8j8
Thats some speedy driving! I know that Johnner (Banshee) was in the 12's with a 6 spd. You must be right on his tail if not surpassed him. I too am curious with your launching and your clutch. I know you said you're running a Spec unit. I want a quick shifting unit whenever I get my Ford going.
I am .24 seconds away from banschee....but i am 4 mph higher than him through the trap.
That launch there was a soft 3rd gear launch....I just got the bullet put on today so i am gonna hit the track in a couple weeks with the tuning turned up, more nitrous, and MUCH harder launches.
FYI, that launch was a 2000 rpm 3rd gear launch. I plan on doing a 3500 rpm 10 psi boosted launch next time.
That launch there was a soft 3rd gear launch....I just got the bullet put on today so i am gonna hit the track in a couple weeks with the tuning turned up, more nitrous, and MUCH harder launches.
FYI, that launch was a 2000 rpm 3rd gear launch. I plan on doing a 3500 rpm 10 psi boosted launch next time.
Well that particular night was me.....but all the boys didnt show up.....if barry takes mikes truck too the track it will be that one....I am thinking it will easily hit the 9's this year.
Thread
Thread Starter
Forum
Replies
Last Post
trophystock
12 Valve Engine and Drivetrain
4
Jul 16, 2006 11:00 AM



