DJM

Anyone have any experience or suggestions on getting some wires thru the firewall ?

I am adding some switches and an additional fuse block.

Thanks in advance for any information.

NB64

Yes on the fire wall on the driver's side. There is a large black rubber boot. I poked a hole through that and it is within easy reach on the inside. Just make a small slice big enough for the amount of wires you want to run through there...If you can't find it let me know and I'll take a picture and post it.

Evildiesel

theres also a small black boot normally used for the shift cable on automatics. but has no function on the manuals.

sheriffav8r

Just pull that boot towards the interior of the cab and it will come loose from the firewall. Easy to get anything through, then....