Option out a 2010 on the RAM Site
Thread Starter
Registered User
Joined: Aug 2005
Posts: 28
Likes: 0
From: Kokomo, IN, USA
Option out a 2010 on the RAM Site
You can option out the 2010 3/4 and 1 ton trucks from here:
http://www.dodge.com/en/2010/ram_2500_3500/
Click "Build My Own" after the link...
RAM Trucks link:
http://www.ramtrucks.com/en/
http://www.dodge.com/en/2010/ram_2500_3500/
Click "Build My Own" after the link...
RAM Trucks link:
http://www.ramtrucks.com/en/
Registered User
Joined: Dec 2006
Posts: 275
Likes: 0
From: Remote SE Arizona Desert Mtns
Thanks for the link.
I ordered an fully optioned SLT 3500 4x4 crew and compared it to a Laramie
optioned like the SLT (ex leather) from the link.
There was only a $1K difference between the two trucks MSRP. I can only figure it's the leather. Everything else was the same.
Not sure why they market two practically identical trucks. Maybe the climate control system is zoned unlike the SLT.
I ordered an fully optioned SLT 3500 4x4 crew and compared it to a Laramie
optioned like the SLT (ex leather) from the link.
There was only a $1K difference between the two trucks MSRP. I can only figure it's the leather. Everything else was the same.
Not sure why they market two practically identical trucks. Maybe the climate control system is zoned unlike the SLT.
Thread
Thread Starter
Forum
Replies
Last Post
nvr-enuf
4th Gen Engine and Drivetrain-2010 and Up
12
Apr 22, 2013 01:38 PM
truckin-on
4th Gen Ram -Non Drivetrain- 2010 and Up
14
Feb 6, 2010 12:19 AM