Rear brakes/rotors on a DRW
#1
Registered User
Thread Starter
Rear brakes/rotors on a DRW
Gotta say, doing the rear brakes on a DRW with c-spine issues (causing arm weakness) is no fun.
Got it done, but am paying for it today.
Hardest part was separating the hubs from the rotors, as you can't effectively do that with an air impact and my arms are weakened by by the spine issue.
No more warped rotors and skinny pads on the rear, though
Next weekend... ball joints and drag link! (I'm doing those at the shop, on the lift and with help!!)
Got it done, but am paying for it today.
Hardest part was separating the hubs from the rotors, as you can't effectively do that with an air impact and my arms are weakened by by the spine issue.
No more warped rotors and skinny pads on the rear, though
Next weekend... ball joints and drag link! (I'm doing those at the shop, on the lift and with help!!)
Thread
Thread Starter
Forum
Replies
Last Post
jlipskoc
3rd Gen Engine and Drivetrain -> 2003-2007
9
03-07-2009 08:00 PM
SSminnow
3rd Gen High Performance and Accessories (5.9L Only)
1
01-13-2007 11:38 AM