2014 Laramie Mirror (glass only) removal
#1
2014 Laramie Mirror (glass only) removal
Picked up a new Laramie, great truck, bells and whistles and all that- but the thing is covered in chrome and I'm not much of a chrome guy. I've blacked out all of it with Plasti-Dip, except for the caps on the side view mirrors. The only way to gain access to remove them that I've found was from a 2012, guy said to basically just tilt the mirror down and pull it out of the housing to expose the screws holding the cap on. I'm a bit hesitant to try this with the motors and heater element that's in there, a phone call to the local service dept didn't yield any advice. Does anyone know how these things are put together?
#2
Registered User
Dealer here told me once they're in that's it and they usually break pulling them out. Maybe try a body shop or collision repair place for some tips as they will have much more experience than the dealer who would just rather sell you a new mirror.
Thread
Thread Starter
Forum
Replies
Last Post
ncj01
2nd Gen. Dodge Ram - No Drivetrain
2
04-26-2014 01:36 AM
ppsi
3rd Generation Ram - Non Drivetrain - All Years
3
10-05-2011 07:41 PM
6-Pack
3rd Generation Ram - Non Drivetrain - All Years
7
03-24-2009 09:53 PM
Herrin811
3rd Generation Ram - Non Drivetrain - All Years
11
06-22-2006 08:06 PM