Just picked up my truck from the blown tranny line and my mini max wasnt fully working. all the themps where working, just not the turbo guage. the programer says D-5 and when i drive it it says TC Locked. does anyone know whats up with it?

thanks for all your help once again.

 

I have never heard of this issue. Contact H&S! Go over the installation. Be 100% positive that you confirmed the software before the install. Go on the H&S website, download the current software, and re-install. That will at least confirm you have the appropriate firmware.

Did you perform the full delete? Exhaust, EGR, Cooler, etc...

 

I have tried all the easy stuf. unpluging it reseting everything I have looked the book over. i think they did something as its reading TS-Locked. i will keep reading and surfing around if no luck i will call them in the am. it was to late when i picked it up. I took it in for a blown tranny line and they must have plugged into the conection and it went into safe mode or something. what doesnt make seense is everything else works,

 

OK, I feel like a Dummy I solved the problem, on page 22it says press and hold what one of the four buttons on the left for a few seconds to display that item in the large gauge. there is a little black dot that tells you what one is currently displayed. I must have read over that 5 times before i posted my problem. the TC locked must be the tranny programing you can buy and unlock it to get better tranny settings,m

as allways thanks for your help.