http://www.ebay.com/itm/HUMMER-H2-17...ef9b67&vxp=mtr

Thinking about buying these and shooting them black. What is involved in order to get them to fit

Thanks for any and all comments,
stjeff

 

Tons of info on here about the mod. Basically you have to reem/enlarge the center axle hole by about 2/16th. Easily done w/a router, high speed cutoff wheel or zip tool.

 

that is only (1) one wheel

 

Easiest way is to use a router and a carbide tipped flush cutting bit. Set the bearing up to ride on the largest portion of the center bore and machine off the step. Router base rides on flat surface on back of wheel.

 

Just a little heads up...like gcssr said above, thats a little steep for one wheel ($200 with shipping). Ive seen all four wheels on Craigslist for that price.

 

Joins 09/16/12, makes one post to an Ebay ad, never mentions what rig he has that he is concerned with them fitting and is never heard from again...hmmmm?