3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

not saved by the bell

Thread Tools
 
Search this Thread
 
Old Sep 8, 2008 | 06:03 PM
  #1  
tugboat's Avatar
Thread Starter
Registered User
 
Joined: Sep 2008
Posts: 1
Likes: 0
Unhappy left lowbeam out,new bulb doesnt help

hoping for advice,my lefthand lowbeams out for the 2nd time, 1st time I changed bulb,that did nutn,ckd fuses,grounds, wires that did nutn,finnally took to dodge ,they replaced module on side of fuse box,400.00 bucks.that was 1 year ago,last week lamp out bell rang again sooo I changed bulb,etc. etc. any suggestions before Im back at dodge..2004 3500 dually,320k

Last edited by tugboat; Sep 8, 2008 at 06:56 PM. Reason: adding model& year of truck
Reply
Old Sep 9, 2008 | 03:01 PM
  #2  
Hounddog's Avatar
Registered User
 
Joined: Mar 2004
Posts: 4,463
Likes: 0
From: Ila georgia
If those bulbs are touched on the glass area by a hand or a greasy/dirty fingers it will shorten the life of them.So might try another,keep it clean and see.Might also be a ground issue and high resistance.Lots of things can/will cause high resistance and shorten the life of a bulb.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
big jimmy
2nd Gen. Dodge Ram - No Drivetrain
3
Mar 31, 2006 01:33 PM
alborada
1st Gen. Ram - All Topics
2
Feb 19, 2006 06:53 PM
NJMurvin
3rd Generation Ram - Non Drivetrain - All Years
30
Oct 18, 2004 05:53 PM
popeye
Towing and Hauling / RV
6
Mar 7, 2003 08:14 AM
Battering Ram
Suggestions, Comments and Site Questions
7
Oct 29, 2002 08:40 PM




All times are GMT -5. The time now is 04:15 AM.