Need frame dimensions for wrecked truck
12-26-2010, 10:18 AM
#1
Registered User
Thread Starter
Join Date: Oct 2007
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
Need frame dimensions for wrecked truck
Ok hit a patch of ice and hit a tree!!!! I worked in a collision shop for 15 yrs. so I am fixing my self! Pretty minor damage considering what could have happened.All damage is in the front bumper and broken headlamp, no sheet metal damage. Front core support swayed over about a inch , I am looking for the inside dimensions for the front frame rails (right were the bumper mounts ) I don't think there is any damage , but just want to be sure before I reassemble.
So I am looking for inside dimensions of frame at the most forward point for a 2006 2500 4x4 with the cummins diesel , thanks!!!!!!!!!!!!!!!!!!!!!!!
So I am looking for inside dimensions of frame at the most forward point for a 2006 2500 4x4 with the cummins diesel , thanks!!!!!!!!!!!!!!!!!!!!!!!
12-26-2010, 10:34 AM
#2
Registered User
This might help you.
http://www.dodge.com/bodybuilder/200...x459diesel.pdf
I use this web site to get the information. http://www.dodge.com/bodybuilder/year.pdf
Good luck.
Jim
http://www.dodge.com/bodybuilder/200...x459diesel.pdf
I use this web site to get the information. http://www.dodge.com/bodybuilder/year.pdf
Good luck.
Jim
Thread
Thread Starter
Forum
Replies
Last Post
justagoodolboy
1st Gen. Ram - All Topics
19
07-12-2009 09:15 PM
justsayer06
3rd Gen High Performance and Accessories (5.9L Only)
25
03-12-2009 11:00 PM
Strjock81
3rd Gen Engine and Drivetrain -> 2003-2007
9
02-03-2008 11:48 AM
ptgarcia
3rd Generation Ram - Non Drivetrain - All Years
2
09-12-2006 06:04 PM