Muffler Elimination kit
#1
Registered User
Thread Starter
Join Date: Dec 2006
Location: Cypress, Tx
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Muffler Elimination kit
Is there suppose to be a hanger in the area of the resinator on this kit? I have had the kit on for about two years now and every couple of weeks I have to get underneath and pry the resonator off of the crossmember. When it sits on the crossmember it makes a very annoying rattle. Any thoughts or suggestions. The kit is the one from Genos and is very good, like the sound but not the rattle.
#2
Registered User
Join Date: Oct 2008
Location: Northern Michigan
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
I really didnt like how 'loose' the tip of the exhaust felt on mine after eliminating the muffler. I took mine to the local muffler shop and they welded two hangers to fit in the stock hanger locations of the muffler. Exhaust is super tight now. Im sure any competent muffler shop can fix you up as long as you have the rubber hangers still.
#3
Registered User
i got the same one from Geno's. No hanger no issues. I was thinking of getting one welded on to the delete pipe though(like Pikeman said) Just for peace of mind..
Thread
Thread Starter
Forum
Replies
Last Post
swansong04
3rd Gen High Performance and Accessories (5.9L Only)
2
10-26-2005 10:17 AM
drew03
3rd Gen High Performance and Accessories (5.9L Only)
2
09-25-2005 10:45 PM
silverram323
Performance and Accessories 2nd gen only
8
08-18-2003 10:21 PM