I'm looking for a picture of how the rear seats are attached on the 03-current QC. Thanks for the help.

 

When you flip the seats up, you will see 4 largish bolts. You will also have to deal with the seat belt (no big deal).

In the back, there are metal loops on the back of the cab that clips on the seat attach to. You just shove the back of the seat upward to release.

I'm not sure if I have any photos...

 

the seat bottom, or the seat back?

 

Here are pics out of the 03 DR Service Manual.

 

Yep simple as pie, flip the seat up and there are 4 bolts per section and two for the middle belt retractor. The bolts are 18mm and the retractor has one Torx T-50
Lift straight up as there are locater dowels in the front and hooks on the rear wall.

 

Thanks guys. It's not going to be simple as pie I'm afraid. These are going into an 84 Crew Cab. Everything has to be fabbed. Oh well, gives me something to do.