I'm having issues with my trailer plug and lights and think it might be the Integrated power module that is bad. I'm currently getting no signal for the Left trailer light and noticed last night when troubleshooting it I could hear the relay clicking under the hood for the right side but not for the left side. I also have no constant 12V on the trailer plug checked the fuse, seemed OK but replaced it anyhows. Also having an issue with the brake controller, not seeming to get signal for that and the brake controller seems to be functioning OK. I have a second brake controller, thought about swapping it out but thought this might just all be related. Did a TON of reading online and I think this all points to the IPM. If thats the case, I might just go and install a POWER MODULE like a lot of other guys did and run my 12V direct from the battery and run another wire from the brake controller. This sound right at all????