3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

Heater controls

Thread Tools
 
Search this Thread
 
Old Nov 9, 2006 | 01:06 PM
  #1  
HydraulicGuy's Avatar
Thread Starter
Registered User
 
Joined: Mar 2003
Posts: 71
Likes: 0
From: Vergas, MN
Heater controls

Anybody had issues with the heater / defrost / cooling controls? Mine will not shift from defrost to the floor fully. Somtimes it will, somtimes it won't. Itseems to get stuck in the middle. Any info is helpful.

Thanks
Reply
Old Nov 9, 2006 | 01:08 PM
  #2  
BigDave12768's Avatar
Registered User
 
Joined: Jul 2006
Posts: 1,132
Likes: 1
From: MA
Common problem with the blend door. Search the site for it. I has been discussed to no end. But I am sure members will chime in
Reply
Old Nov 9, 2006 | 01:20 PM
  #3  
Jonesey's Avatar
Registered User
 
Joined: Dec 2002
Posts: 684
Likes: 0
From: Southeastern,OH.
It sounds as if yours has the broken blend door syndrome. It is a known problem. Mine has been replaced three times. The first time was just after the 3/36K bumper to bumper expired. DC did a goodwill 1/2 payment. It still cost me approximately $275.00. The next two times it broke, it cost me nothing because it was covered under the DC 1 year parts and labor warranty. If you are not too far out of warranty, contact DC customer service after you have the dealership diagnose the problem. You might get some financial help with this repair. Good luck.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NGA Ram
2nd Gen. Dodge Ram - No Drivetrain
1
Nov 15, 2006 05:00 PM
SmokinFive9 4x4
1st Gen. Ram - All Topics
5
Apr 4, 2005 03:17 PM
INJECTOR JACK
2nd Gen. Dodge Ram - No Drivetrain
5
May 10, 2004 09:14 PM
patriot pearl blue
24 Valve Engine and Drivetrain
10
Dec 28, 2002 12:44 PM




All times are GMT -5. The time now is 09:19 AM.