just bought an 07 mega cab 3500 looking for someone that might be interested in doing a parts trade i dont need the drw anyone have ideas? i have brand new tires less than 100 miles on them.

 

I would trade in a heartbeat, the distance might be a little too far though???

 

whats half way from maine to oregon road tip lol

 

DANG>>>>>>> Im in NC right now, but spent a month out there a few weeks back!!!

 

thats seems like the trend lol i would like to find some one with some nice wheels and tires that wants a dually here in the northwest do u have to change rearends?

 

It's my take that it can be done w/o swapping axels.

 

just run the wider dually rear end its 2 inches wider i think

 

bump for anyone wanting to go with a dually setup?

 

In order to make the swap to and from a DRW the axle needs to be swapped. I did this a few years ago and swapping the axle is easy, there is no need to even swap the rotors. We disconnected the brake lines and calipers as an assembly so we didn't even need to bleed the brakes. Roll one axle out and role the other in. The hardest part was removing the hub centric rear wheels and wiring the fender lights. Otherwise it was plug and play!

 

cool thanks for the info now i just need to find someone to swap with

 

bump!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

anyone out there want to go with a dually setup???

 

bump!!!!!!!!!!!!!!!

 

If you want to make a run to Texas, I'm in. Even our trucks are the same color My tires and rims are chrome 2010 laramie rimes with new 285/70R17 Nitto Terra Grapplers.

 

Lincoln, NE, or about 1,600-miles from either end.

A guy could make a round trip from Portland, ME to Portland, OR and head back via Portland, TX across the bay from us here, and thence through Portland, TN on the way back.

About 7,500-miles.

Even at my 16-cpm we'd be looking at $1,200 in fuel.