Hey there!! Quick question... I had the draw tight brake controller installed with my gooseneck hitch about 4 months ago... Tonight as I hooked up the rig to come home from Phoenix my controller never detected that my trailer was plugged in, It will show a "C" meaning connected but I got nothing, as if it was not plugged in. I checked all the connections etc... I turned on my lights and they all work fine... Turn sigs, brake lights, etc... Just no actual Brakes.... Any ideas before I drive all the way down for them to look at it?? Thanks!!!

 

Did you check the back of the plug on the truck side to make sure the one that powers the brakes is still good?

 

Thats what I am going to do this afternoon, pull the bed plug and make sure all the wires are secure. Thanks for the help!