Bushwaker Flares, Pro Comp 35" XAT, Eagle Alloys
Bushwaker Flares, Pro Comp 35" XAT, Eagle Alloys
Well, I ended up coming across a good deal on some 18" Eagle Alloy wheels with the correct offset. I also found a deal on some used Pro Comp Extreme All Terrain tires that someone had taken off of a vehicle after only driving on them for 2 months. The guy went to taller tires and I got a nice deal out of it. I finally got around to painting a set of Bushwaker Extend-a-Fender flares that I received for a Christmas gift from my wife. I was finally able to put everything together and here are some pictures. Hopefully the pictures show up. The tires are E rated. No lift or leveling kit has been installed. The tires don't rub at full turn. I like the stance, but if I end up rubbing at all I will probably have to install a leveling kit. Thanks for checking out my truck!
Registered User

Joined: Feb 2004
Posts: 3,640
Likes: 0
From: Surrey BC Canada (it's not that bad eh!)
Looks great!
My 35's on H2's rub the ATS flares I just put on, gotta trim the cornres.
Keep in mind if you level it the axle will be pulled towards the fender about ½".
My 35's on H2's rub the ATS flares I just put on, gotta trim the cornres.

Keep in mind if you level it the axle will be pulled towards the fender about ½".
Thread
Thread Starter
Forum
Replies
Last Post
nvr-enuf
3rd Gen Engine and Drivetrain -> 2003-2007
0
Nov 30, 2009 06:58 AM
yamarx1
3rd Generation Ram - Non Drivetrain - All Years
3
Nov 19, 2007 10:56 PM
cumminsdriver635
General Diesel Discussion
2
Dec 8, 2004 10:03 PM



