3rd Generation Ram - Non Drivetrain - All Years Talk about the 2003 and up Dodge Ram here. PLEASE, NO ENGINE OR DRIVETRAIN DISCUSSION!.

Bilstein 5100?? Not avail for 06 and 07?

Old Jul 25, 2007 | 04:10 PM
  #16  
Festus's Avatar
Registered User
20 Year Member
 
Joined: Jul 2003
Posts: 2,069
Likes: 0
From: Lloydminster, Alberta, Canada
Originally Posted by carwash
I got an email reply from the guys at bilstein for this exact question. Remember that their shocks are made specifically for a particular vehicle. They have not released their 5100's for the 2006/2007 2500 or 3500 and said that they did not see it happening within the next 6 months. That being said, the guys at Top Gun Cumstomz advised me of the ones that could be used. basically, they are advising that you use the ones for other years as the truck has not changed all that much and they should work fine. Its your decision. I was thinking of going with their advice.

The folks at Bilstein are useless. I got a different answer every time I emailed or talked to them on the phone.

Call Sean at Lorenz Industries and he'll have a set of 5100's for your truck shipped to you.
Reply
Old Jul 25, 2007 | 06:35 PM
  #17  
06megacabman's Avatar
Registered User
 
Joined: Oct 2006
Posts: 336
Likes: 0
From: Sherwood, OR
I just got my set from Sean Lorenz last weekend and installed them myself. Took about 2 hours total.

Truck is an 06 3500 Megacab




Reply
Old Jul 25, 2007 | 06:39 PM
  #18  
ptgarcia's Avatar
Registered User
15 Year Member
 
Joined: Apr 2006
Posts: 5,777
Likes: 0
From: Alta Loma, CA
Originally Posted by 06megacabman
I just got my set from Sean Lorenz last weekend and installed them myself. Took about 2 hours total.

Truck is an 06 3500 Megacab

So how do you feel about the upgrade?
Reply
Old Jul 25, 2007 | 06:42 PM
  #19  
ptgarcia's Avatar
Registered User
15 Year Member
 
Joined: Apr 2006
Posts: 5,777
Likes: 0
From: Alta Loma, CA
Originally Posted by Grocery Getter
Thanks all. I spoke with Sean at Lorenz, nice guy! He said to really get rid of the rear bouncing, caused by the high spring rates, I would need the Bilsteins and also his DP leafs for the rear. That should do it since my truck is stock.

Well, crap... that is now about $2K for the anti-bounce mod. Very rough calculation
$294 shocks
$1,100 DP Rear Leafs
$250 apprx. Shipping
$200 apprx. install
$1,844

Save $700 and get Carli's add-a-pack instead. Do the install yourself and your total will be well under $1000.
Reply
Old Jul 25, 2007 | 07:01 PM
  #20  
Raspy's Avatar
DTR's 'Wrench thrower...' And he aims for the gusto...
 
Joined: Oct 2003
Posts: 2,668
Likes: 3
From: Smith Valley, NV (sometimes Redwood City, CA)
Bilstein said the same thing about the '04s. Not available. Well, I just went out and bought them anyway and they fit and work fine.

Bilsteins may be made better than Ranchos, I don't know, but Ranchos are better for the rear with added tongue weight. Sometimes heavy, sometimes light. I crank mine all the way to hard when towing and it makes a big difference. Then back to light for cruising empty and the handling is great. Much better than stock.

Don't do anything with your springs till you get shocks, then decide on springs.

John
Reply
Old Jul 25, 2007 | 07:25 PM
  #21  
06megacabman's Avatar
Registered User
 
Joined: Oct 2006
Posts: 336
Likes: 0
From: Sherwood, OR
Originally Posted by ptgarcia
So how do you feel about the upgrade?
Best money I've spent so far on the truck, WOW what a difference............Well other than the Quad XZT that is.
Reply
Old Jul 25, 2007 | 07:28 PM
  #22  
06megacabman's Avatar
Registered User
 
Joined: Oct 2006
Posts: 336
Likes: 0
From: Sherwood, OR
but Ranchos are better for the rear with added tongue weight
I guess I solved that problem with some Air Lift Air Bags instead of the Ranchos as I run a 1200 lb tongue weight on my Toy Hauler.

I went back and forth on Rancho versus 5100 and decided I wanted the performance and look to be the same all the way around the truck. Didn't think I would like the red and white out back and silver/Black up front. I know, I know, sounds superficial.
Reply
Old Jul 25, 2007 | 07:29 PM
  #23  
ptgarcia's Avatar
Registered User
15 Year Member
 
Joined: Apr 2006
Posts: 5,777
Likes: 0
From: Alta Loma, CA
Originally Posted by 06megacabman
I guess I solved that problem with some Air Lift Air Bags instead of the Ranchos as I run a 1200 lb tongue weight on my Toy Hauler.

I went back and forth on Rancho versus 5100 and decided I wanted the performance and look to be the same all the way around the truck. Didn't think I would like the red and white out back and silver/Black up front. I know, I know, sounds superficial.

You made a good choice.....
Reply
Old Jul 25, 2007 | 08:28 PM
  #24  
Raspy's Avatar
DTR's 'Wrench thrower...' And he aims for the gusto...
 
Joined: Oct 2003
Posts: 2,668
Likes: 3
From: Smith Valley, NV (sometimes Redwood City, CA)
Originally Posted by 06megacabman
Best money I've spent so far on the truck, WOW what a difference............Well other than the Quad XZT that is.
I've been thinking about bags for mine too.

I was wondering if you pulled out any leaves? Also does axle wrap up cause any problems with the bags? What happens when the truck is up on a lift with the axle hanging?

Thanks, oh, and sorry to hijack the thread


John
Reply
Old Jul 25, 2007 | 11:49 PM
  #25  
06megacabman's Avatar
Registered User
 
Joined: Oct 2006
Posts: 336
Likes: 0
From: Sherwood, OR
Originally Posted by Wetspirit
I've been thinking about bags for mine too.

I was wondering if you pulled out any leaves? Also does axle wrap up cause any problems with the bags? What happens when the truck is up on a lift with the axle hanging?

Thanks, oh, and sorry to hijack the thread


John
No, I did not pull out any leaves. Left it stock. Axle wrap can cause problems with the bags but I haven't put the truck in any situations to have axle wrap really happen yet. My neighbor has an 04.5 with the skyjacker 4" lift with ride rites and has had some axle wrap in the sand but no issues with the bags yet from it. dunno.

As for a lift the bags stretch pretty well, no real issues with them. Really like them. Very easy and clean install for the airlifts brand.
Reply
Old Jul 26, 2007 | 12:26 AM
  #26  
Shagginwagon's Avatar
Registered User
 
Joined: Jul 2007
Posts: 419
Likes: 0
From: West Linn, Oregon
Originally Posted by rustyshakelford
shagginwagon...be sure to join out iaff thread we have going on!

brett
Sure thing. Where's it at?
Reply
Old Jul 26, 2007 | 10:49 AM
  #27  
ptgarcia's Avatar
Registered User
15 Year Member
 
Joined: Apr 2006
Posts: 5,777
Likes: 0
From: Alta Loma, CA
Originally Posted by 06megacabman
As for a lift the bags stretch pretty well, no real issues with them. Really like them. Very easy and clean install for the airlifts brand.

It's not a good idea to let the axles hang unsupported with bags. They will tear.....eventually.
Reply
Old Jul 26, 2007 | 12:39 PM
  #28  
bigcat83's Avatar
Registered User
 
Joined: Dec 2006
Posts: 266
Likes: 0
From: SPRING ,TEXAS
Originally Posted by ptgarcia
It's not a good idea to let the axles hang unsupported with bags. They will tear.....eventually.
I have been looking into the 5100's and the ride rite bags i think that would be a great move for me.
Reply
Old Jul 28, 2007 | 11:27 PM
  #29  
Mopard's Avatar
Banned
 
Joined: Mar 2006
Posts: 235
Likes: 0
I put the 2" levelling spacers and the 5100s on mine late last fall and after just 1 winter they look like crap ... all corroded and pitted ... sucks. Very disappointed with the finish on these expensive $hock$. The ride improvement ... though a little less mushy ... was not as great as I thought it would be ... the stockers weren't all that bad I guess. I plow with mine and the 2" spacers were a HUGE improvement and are perfect.
I'll try a different shock next time.
Reply
Old Jul 30, 2007 | 11:50 AM
  #30  
Grocery Getter's Avatar
Thread Starter
Registered User
 
Joined: Jun 2007
Posts: 116
Likes: 0
I talked with Jeffe at Carli Suspension. Great guy! I really like the sound of his "starter system," but really don't want to raise the truck. The new leaf pkg. would raise the rear about 1 inch and the front springs would raise the front 2+ inches. OK, the truck would sit level, but I know I would be looking at the stock tires and since they look small now, then oh man! I would go for this system, but really don't want the raise the truck. Got two small kids and a wife....

Is there are rear leaf set up, cheaper than Lorenz that won't raise the truck?

I think I will order up some Bilsteins today since I guess it all starts there anyway. I am in sunny CA so hopefully they don't get "pickled" after a year and still look good. Doing the install myself... Should I use some "Locktite" or some other thread locker on the bolts when I re-assemble?
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:27 AM.