I need to replace upper and lower ball joints on my 2004 Ram 2500 four door 2wd with 24 valve Cummins. Do they press in or bolt in,any advice?

 

i dont know about a 2wd since i think those have the chicken wings vs the solid axle. i would check on youtube. might have good luck there.

 

I ordered the uppers as part of the upper A frame. The lowers I believe press in. I have to do all of mine in the near future. The trucks down until then. You can get the uppers with a lifetime warranty from Advance Auto for about $75 each if you call the 800 number and have them price match Rock auto.