Question for you guys. My truck has always pulled a little to the right even when new and after alignments. Tech sheets all say that the numbers are within specs and are very close to dead on. Now that I have a cupping issue wiht my tires, i am almost positive the pulling to the right is the culprit.
The cupping is on right outside and left inside. Any ideas as to what be causing hte pull. Truck is going to the dealer next week as i have a
lake trip planned this weekend and need it.

 

Heres some good info i found to help in diagnosis. Anyone know if the specs on alignment link still apply to 3rd gen since it mentions the Dana axles ?

http://dieselram.com/forum/ubbthread...e=1#Post225785