2015 bed to a 2003 2500 will it work??
#1
2015 bed to a 2003 2500 will it work??
I dented up my truck bed on my 2003 2500 really bad. Gooseneck vs bed wall, the gooseneck won.
I found a 2015 new take off bed locally for a low price. I was wondering if it will bolt up?? Will it hit the body when bolted up?
Thanks for your time
Ethan
I found a 2015 new take off bed locally for a low price. I was wondering if it will bolt up?? Will it hit the body when bolted up?
Thanks for your time
Ethan
#2
Registered User
Idk if it will fit, but early 4th gen trucks were on the same chassis as 3rd gen, but the beds didn't change (appearance anyway) with the chassis update in 2014. Also, 4th gen tailgates fit on 3rd gen trucks, direct fit, so there's a good chance it will bolt up. Again unsure on light plugs/wiring etc.
Not too likely to find someone who's done it, because it will look totally mismatched even if it fits just like those who put new tailgates on old trucks.
Not sure why you'd want to do this unless the truck is just a beater heap anyway and appearance is of no concern.
Not too likely to find someone who's done it, because it will look totally mismatched even if it fits just like those who put new tailgates on old trucks.
Not sure why you'd want to do this unless the truck is just a beater heap anyway and appearance is of no concern.
Thread
Thread Starter
Forum
Replies
Last Post
redramnc
2nd Gen. Dodge Ram - No Drivetrain
6
03-04-2017 02:15 PM
1stgenfurry
4th Gen High Performance and Accessories 2010 and Up
8
06-10-2015 12:37 PM
Ramified5.9
4th Gen Ram -Non Drivetrain- 2010 and Up
3
01-21-2015 07:01 PM
mrhemi
4th Gen Ram -Non Drivetrain- 2010 and Up
3
01-13-2015 11:37 AM
Dean400
4th Gen Ram -Non Drivetrain- 2010 and Up
2
05-14-2011 04:55 PM