3rd Gen High Performance and Accessories (6.7L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 6.7L ONLY!

Sw#0?

Thread Tools
 
Search this Thread
 
Old Nov 17, 2010 | 01:14 AM
  #1  
robby t's Avatar
Thread Starter
Registered User
 
Joined: Sep 2010
Posts: 148
Likes: 0
From: ca
Sw#0?

I copied & pasted the q&a below from mads site..question..
if running on SW#0 is this saying that I am cutting my power in half or adding an additional half to the power I already have?
Also..why do they write "Emissions. Ehm"? ..





Q. Does MADS Electronics Smarty have only CaTCHER software on board?

A. No, Smarty offers SW# 0 that provides about HALF the power of a stock software. Emissions. Ehm. SW# 1 is a Fuel Saver software. SW# 2 deals only with fuel and boost. SW
# 3 is fuel, boost, and timing. The remaining levels can be considered CaTCHERs.
Reply
Old Nov 17, 2010 | 06:58 AM
  #2  
Blake Clark's Avatar
Administrator / Severe Concussion Aficionado
 
Joined: Jul 2008
Posts: 5,491
Likes: 15
From: Home: Kaplan, LA - Pipelining In: Pecos, Tx
Cuts the power in half. It would allow for you to stay programed an pass a visual tailpipe inspection. Lower power = little to no smoke
Reply
Old Nov 17, 2010 | 10:42 AM
  #3  
Beast2B's Avatar
Registered User
 
Joined: Apr 2004
Posts: 912
Likes: 1
From: Sacramento, CA
sw0 worked well on my 01 for visual inspection and throtthe snap test. also worked well on a long road trip when i wanted the cruise control to be very smooth!
Reply
Old Nov 28, 2010 | 10:17 AM
  #4  
Timberwolf2's Avatar
Registered User
 
Joined: Nov 2010
Posts: 104
Likes: 0
Originally Posted by Blake Clark
Cuts the power in half. It would allow for you to stay programed an pass a visual tailpipe inspection. Lower power = little to no smoke
I find the claim that you're at half power hard to believe!
I have not owned my truck very long but 2 months after I bought it, I did a S&B intake with a Flo Pro 5" turbo back and of course a Smarty JR.
I have left the setting at sw#0, which is labeled "fuel economy". I am under the impression that sw#0 is "Stock with deletes".
Though I don't have my foot deep in the throttle very often, it feels just as strong as stock. How can it be half power and feel as strong as stock?

(A. No, Smarty offers SW# 0 that provides about HALF the power of a stock software. Emissions. Ehm. SW# 1 is a Fuel Saver software. )

I too find the wording confusing!
Reply
Old Nov 28, 2010 | 02:06 PM
  #5  
robby t's Avatar
Thread Starter
Registered User
 
Joined: Sep 2010
Posts: 148
Likes: 0
From: ca
hey timberwolf.. i run my smarty on sw#o timing,torque default & it feels strong. like full power, it works great for me...20-22 mpgs on flat road
Reply
Old Nov 28, 2010 | 08:10 PM
  #6  
Timberwolf2's Avatar
Registered User
 
Joined: Nov 2010
Posts: 104
Likes: 0
Originally Posted by robby t
i run my smarty on sw#o timing,torque default & it feels strong. like full power, it works great for me...20-22 mpgs on flat road
Exactly, feels like full power yet 22-25 MPG!
So why does the Smarty Q&A mention half power?
I think the Q&A is too generic.
The info associated with J-67ME lists 3 power levels above stock,
Quote;
SW # 1 : 40 Hp increase
SW # 2 : 70 Hp increase
SW # 3 : 100 Hp increase
End Quote.

So...if I understand correctly...

SW # 0 : Stock with deletes?
Reply
Old Nov 28, 2010 | 10:18 PM
  #7  
robby t's Avatar
Thread Starter
Registered User
 
Joined: Sep 2010
Posts: 148
Likes: 0
From: ca
I have to agree with you...sw#o stock with deletes...thats where I keep it..yesterday I was getting 20 -25 MPG! hard to beat. I have a G56 that helps..what tranny do you have?
Reply
Old Nov 29, 2010 | 05:48 AM
  #8  
Timberwolf2's Avatar
Registered User
 
Joined: Nov 2010
Posts: 104
Likes: 0
Originally Posted by robby t
. I have a G56 that helps..what tranny do you have?
6 speed Aisin Auto
Reply




All times are GMT -5. The time now is 10:51 PM.