EGR Cooler Blockoff Plates
Thread Starter
Registered User
Joined: May 2007
Posts: 936
Likes: 0
From: Dallas, TX
EGR Cooler Blockoff Plates
Well I got my shibby throttle delete and egr cooler delete in the mail today. I figured the throttle delete out no problem but is there an install guide for the egr cooler delete?
Any install instructions or after pics of what needs to be done?
Any install instructions or after pics of what needs to be done?
Administrator / Severe Concussion Aficionado
Joined: Jul 2008
Posts: 5,491
Likes: 15
From: Home: Kaplan, LA - Pipelining In: Pecos, Tx
Cooler delete is lined out on the H&S website.
When I did all of mine I used a combo of MADS, H&S, and DTR info.
Take a look at this.
When I did all of mine I used a combo of MADS, H&S, and DTR info.
Take a look at this.
Administrator / Severe Concussion Aficionado
Joined: Jul 2008
Posts: 5,491
Likes: 15
From: Home: Kaplan, LA - Pipelining In: Pecos, Tx
Be prepared for a battle royal with the lower right 15mm nut in step 11.
It took me having to sacrifice a box end wrench to get it out. I took the wrench, put it in a vice and bent/hammered it to a rough 45 degree angle to be able to get it into position to loosen that nut.
It took me having to sacrifice a box end wrench to get it out. I took the wrench, put it in a vice and bent/hammered it to a rough 45 degree angle to be able to get it into position to loosen that nut.
Thread
Thread Starter
Forum
Replies
Last Post
MOJO1
3rd Gen High Performance and Accessories (6.7L Only)
8
Aug 4, 2009 06:28 PM
eb290
3rd Gen Engine and Drivetrain -> 2007 and up
1
May 22, 2008 05:16 PM
