2007 3500 heavy duty with 6.7 full mod done was suggested to get gauge for fuel press
#1
2007 3500 heavy duty with 6.7 full mod done was suggested to get gauge for fuel press
Hey all new here, had a question.
Just bought a dodge 3500 with 6.7 the previous owner did egr delete and cat removal and installed mini max tuner.
Great power no problems, went in for an oil change and the young man mentioned that I might want to invest in a pillar pod with fuel rail pressure gauge and a gauge in fuel line to monitor the pump something to do with if the pump fails the pick up pump still will draw up fuel but will cause it to burn out if not caught soon enough.
I am new to dodge and to Cummings engine so any thoughts on this or recommendation.
Thanks Carlos
2007 3500 dodge 6.7 Cummings
Cat deleted
Mini max tuner
Just bought a dodge 3500 with 6.7 the previous owner did egr delete and cat removal and installed mini max tuner.
Great power no problems, went in for an oil change and the young man mentioned that I might want to invest in a pillar pod with fuel rail pressure gauge and a gauge in fuel line to monitor the pump something to do with if the pump fails the pick up pump still will draw up fuel but will cause it to burn out if not caught soon enough.
I am new to dodge and to Cummings engine so any thoughts on this or recommendation.
Thanks Carlos
2007 3500 dodge 6.7 Cummings
Cat deleted
Mini max tuner
Last edited by 1Ckreuzer; 08-22-2019 at 03:14 PM. Reason: Miss spell auto correct
#2
"California Style"
I am not familiar with the Mini Max, but perhaps it has a gauge setting to see fuel pressure and/or rail pressure? Those are good items to monitor and help with troubleshooting.
The following users liked this post:
1Ckreuzer (08-22-2019)
#3
Thread
Thread Starter
Forum
Replies
Last Post
verdesardog
3rd Gen High Performance and Accessories (5.9L Only)
9
10-08-2012 12:00 AM
PhilR
3rd Gen High Performance and Accessories (5.9L Only)
6
09-19-2007 08:16 AM
35" 05'
3rd Gen High Performance and Accessories (5.9L Only)
13
08-28-2006 10:49 AM