dslpwr81

Ok, now that I have all the USB things (whatever they are) pulled up, which one of the 11 do I click on????

MikeyB

Do you see the USB Serial Converter at the bottom of the list when the SMARTY is plugged in?

MikeyB

dslpwr81

Yes, when Smarty is plugged in it is there.

dslpwr81

It says this device is working properly.

MikeyB

If the DM sees the SMARTY and it's enabled it should be working correctly.

Did you download the latest SmartyUSB.exe program?

MikeyB

dslpwr81

Yes I downloaded the latest SmartyUSB.exe. program.

MikeyB

Ok. This is a long shot but are you using Vista? If so right click on the SmartyUSB.exe program and go to Properties. Click on Properties and select the Compatibility tab and go to Compatiblity mode. Enable and select XP. Click either OK or Apply and try running the program again.

MikeyB

dslpwr81

Nope. No vista.

dslpwr81

Is there a certain time when I am suppose to plug in my smarty? Once it is plugged in, there has to be a way to find it.
Here are the directions for installing the driver http://www.madselectronics.com/downl...nstallationpdf
This is the part I am having trouble with.

MikeyB

Lets update the driver manually. Did you down the driver from Mads website to a folder you can easily find? If so go to the Device Manager and right click on the USB Serial Converter (SMARTY must be plugged in). Select Update Driver and the install wizard will appear. You should be able to go from there.

MikeyB

dslpwr81

When I click run, it brings up a dialog box that says SEND.

MikeyB

See my previous thread on the driver update.

MikeyB

dslpwr81

I have downloaded SmartyUSB.exe, CDM 2.00.00, and S06V411BD211B47.7z. Am I missing somthing?

dslpwr81

I think you may have just figured it out for me. Hold on. My comp is a little slow, and so am I. lol. Hang tight.

dslpwr81

When the dialog box comes up and says "search for the best driver in these locations," which one do I pick?