Where to mount amateur/CB on an 03?
Guest
Posts: n/a
Re:Where to mount amateur/CB on an 03?
Below is the install in my old truck. I'm wanting to do the new truck close to the same, but the 6 spd makes it much more difficult. I was thinking about doing a console in the center, but I'm not sure if I really want to get rid of the middle seat. With those radios, it's hard to mount them on a adjustable pole because of the weight.
Registered User
Joined: Feb 2002
Posts: 1,424
Likes: 0
From: Sturbridge, Taxachusetts
Re:Where to mount amateur/CB on an 03?
This is how I have mine mounted:
The mount is made by RAM and is RTV'd to the underside of the dash. I clamped it in place with a mini cabinet clamp until the RTV set up. This is a really nice location because you don't have to look down to twiddle the dials.
BTW, the radio itself, is mounted to a seat bolt as shown below. The little box on the floor is the diplexer for the 2 antenna on the fenders.
The mount is made by RAM and is RTV'd to the underside of the dash. I clamped it in place with a mini cabinet clamp until the RTV set up. This is a really nice location because you don't have to look down to twiddle the dials.
BTW, the radio itself, is mounted to a seat bolt as shown below. The little box on the floor is the diplexer for the 2 antenna on the fenders.
Thread
Thread Starter
Forum
Replies
Last Post
chw
3rd Gen High Performance and Accessories (5.9L Only)
2
Dec 25, 2006 04:30 PM
n5oxp
3rd Generation Ram - Non Drivetrain - All Years
11
Sep 3, 2003 01:11 PM