Stocker/S475 twins
#1
Registered User
Thread Starter
Join Date: Oct 2007
Location: Fort Collins CO
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
Stocker/S475 twins
I'm putting twins on my truck and have choice between 2 S475s, one is a 1.10 housing and the other a 1.32 I belive. The 1.10 housing will save me $200, but I was concerned about size. Will the 1.10 housing be big enough? I would imagine these twins would spool up very very fast, but might lack on the top end. And how much power is left on the table going from a 1.32 to a 1.10? Any ideas?
#3
Registered User
Thread Starter
Join Date: Oct 2007
Location: Fort Collins CO
Posts: 476
Likes: 0
Received 0 Likes
on
0 Posts
#4
Registered User
Join Date: Jul 2007
Location: State College PA
Posts: 315
Likes: 0
Received 0 Likes
on
0 Posts
The AR 1.10 is going to have higher drive pressure on top end but it will spool quicker and the AR 1.32 is going to spool slower but have lower drive pressure on the top end. HTT recommends one with a AR of 1.25
Thread
Thread Starter
Forum
Replies
Last Post
Stainless
3rd Gen High Performance and Accessories (5.9L Only)
69
03-20-2009 12:03 PM