Source Automotive Compounds for Gen III's
#1
Registered User
Thread Starter
Join Date: May 2007
Location: Windsor, CO
Posts: 77
Likes: 0
Received 0 Likes
on
0 Posts
Source Automotive Compounds for Gen III's
I just talked to Rip at Source Automotive and he was telling me about his conmpound turbo setup for the gen III's. It uses an S300 and S400. I really dont know much about turbos, so does this look like a good pair?
#3
Registered User
I have his 2nd gen set, using the same turbos. They work very well on my truck. I have seen a couple of the 3rd gen sets and they looked very good. I believe that a 3rd gen dually took the top hp at the Fast Specialties Dyno, this last weekend, with these twins on it.
Hope this helps...
Paul
Hope this helps...
Paul
#7
Registered User
Join Date: Dec 2003
Location: Boise, Idaho
Posts: 5,540
Likes: 0
Received 0 Likes
on
0 Posts
S300's are any 62/64/66 - 12/13/14 you have read about...ie II or HTT or BD or etc etc etc.
S400's are STOUT. What wheel is in it...what housings are on it...those are the variables.
they could be good for 450 hp up to 800 or so depending on what is combined.
Kind of a bland answer...ask him more.
S400's are STOUT. What wheel is in it...what housings are on it...those are the variables.
they could be good for 450 hp up to 800 or so depending on what is combined.
Kind of a bland answer...ask him more.
Thread
Thread Starter
Forum
Replies
Last Post
4969joes
12 Valve Engine and Drivetrain
2
01-14-2012 11:00 AM
aggiehorsepower
Performance and Accessories 2nd gen only
1
01-17-2007 10:28 PM
Syndicate
3rd Gen High Performance and Accessories (5.9L Only)
6
02-13-2006 01:00 PM