wyosteve

I'll try to describe the brackets. They are basically 2 plates that are just wide enough to fit the frame between. The bolts then go thru one side plate, thru the frame and thru the other side plate. The plates have about a 1.5 inch diagonal slot to allow for some front/back and up/down adjustment. Hope this helps.

Patriot_RAM

DJGaston -- Here are a couple of photos of the brackets on my 3rd gen. Sorry about the contrast and brightness of the second pic, but I had to increase it 300% before I could see the bolt holes in the brackets. Hope this is helpful!

8mpg

Thanks for the pics, that sorta helps me figure out how Im gonna mount my homemade... Any pics of the backside of the bumper?

Patriot_RAM

I don't see that I took any of the backside of the bumper. Sorry 'bout that!

CrashCade

I think that might be so they can cover some legal fees for reverse engineering Road Armor Bumpers, but maybe I am wrong? Maybe that was Just Hear Say?

CrashCade

I will say that when the Toyota Seqouia Challenged my front bumber she definitely lost. Scratched the powder coating and that was about it. She hit it twice even. The Valet guy said she backed into me at about 15 mph Drunk off her gord then pulled forward and must have thought she put it in park and let it get about a 30' rolling start in reverse at it again. Cavedin the D pillar on the Seqouia and broke all the glass. It didn't even touch my PIAA's lots of her broken glass in the lens outlets but didn't break my lights!

smokey196240

so far road armor 2 others ZERO

Big Bob

Somebody say Road Armor?

smokey196240

that is the one i want to put on my 06looks awsome