Rear Diff - Mag Hytec Quantity ?
Thread Starter
Registered User
Joined: Jan 2004
Posts: 415
Likes: 0
From: Chestermere, Alberta, Canada
Rear Diff - Mag Hytec Quantity ?
I know the manual says 4L for the rear and 2.5L for the front. What is the rear capacity with a MagHytec diff cover. If memory serves me was it not 7L ? I can't remember. Anyone
Registered User
Joined: Feb 2005
Posts: 337
Likes: 0
From: Glendale(Phoenix),AZ.
In the center of the identification plate on the back of the Mag Hytec, you will find a plug. That is the level that the factory determines to be stock.
On the dipstick, there are two levels. The lower level will put the fluid just inside of the bottom of the axle tubes.
The higher line on the dipstick will put the fluid level at the bottom of the axles that are inside the axle tubes.
Hope this helps.
Joe F.(Buffalo)
On the dipstick, there are two levels. The lower level will put the fluid just inside of the bottom of the axle tubes.
The higher line on the dipstick will put the fluid level at the bottom of the axles that are inside the axle tubes.
Hope this helps.
Joe F.(Buffalo)
Thread
Thread Starter
Forum
Replies
Last Post
Treangen
3rd Gen High Performance and Accessories (5.9L Only)
6
May 28, 2007 11:06 PM
JuzPlaneKrazy
3rd Gen High Performance and Accessories (5.9L Only)
12
Jan 19, 2007 10:21 AM
hognutz
3rd Gen High Performance and Accessories (5.9L Only)
8
Jun 21, 2006 11:56 PM
TexasCTD
3rd Gen High Performance and Accessories (5.9L Only)
4
Apr 5, 2005 03:31 PM
lucey
3rd Gen High Performance and Accessories (5.9L Only)
3
Mar 10, 2005 11:13 AM
