3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

Post your Dynoed HP/TQ With the mods!!!

Thread Tools
 
Search this Thread
 
Old May 25, 2007 | 06:46 PM
  #1  
DevilDogge's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 61
Likes: 0
From: Scottsburg, IN
Post your Dynoed HP/TQ With the mods!!!

Hey guys, I wanted to get a thread going to see what kind of power the different setups are putting out. I know there's some big dogs on this site, so lets see 'em!!!
Reply
Old May 25, 2007 | 06:54 PM
  #2  
trik396's Avatar
Registered User
 
Joined: Apr 2004
Posts: 3,241
Likes: 1
From: NW Indiana
Not a big dog.... but here ya go.

Diablosport Predator custom 200hp tune.
VA3.2 on 70hp
Quad's XZT
Silver64

573rwhp/1200+trq
Reply
Old May 25, 2007 | 07:10 PM
  #3  
03qclb5spd's Avatar
Registered User
 
Joined: Apr 2006
Posts: 1,370
Likes: 0
From: South Indy
see my sig
Reply
Old May 25, 2007 | 07:59 PM
  #4  
94ttss's Avatar
Registered User
 
Joined: Oct 2006
Posts: 140
Likes: 0
From: NJ
See sig....
Reply
Old May 25, 2007 | 08:46 PM
  #5  
Boz007's Avatar
Registered User
 
Joined: Nov 2005
Posts: 1,318
Likes: 0
From: Nashville, TN
See sig....
Reply
Old May 25, 2007 | 09:02 PM
  #6  
lmills's Avatar
Registered User
 
Joined: Jan 2006
Posts: 1,484
Likes: 0
From: swinging wrenches in MD
768 HP

Don M injectors
Smarty
SP Diesel pressure box
Helix 2
Floor it diesel stage 2 modded pump
Water/Meth
Custom built twins consisting of a High tech turbo quick diesel 64 with a stainless housing up top and a HTT modified s400 on the bottom

726 HP

Don M injectors
Van Aaken C5 module
Helix 2
Floor it diesel stage 2 modded pump
Piers twin turbos ( HX40/HT3B)
Reply
Old May 25, 2007 | 09:43 PM
  #7  
jvjump's Avatar
Registered User
 
Joined: Oct 2006
Posts: 118
Likes: 0
From: Irving il.
Trying to grow into a big dog still just a pup.
Reply
Old May 25, 2007 | 10:09 PM
  #8  
Robert P's Avatar
Banned
 
Joined: Jul 2005
Posts: 406
Likes: 0
From: MD
see sig!!
Reply
Old May 25, 2007 | 10:51 PM
  #9  
Luvnacumns's Avatar
Banned
 
Joined: Dec 2005
Posts: 5,194
Likes: 0
From: Twin Falls, Idaho
See Sig!!!!
Reply
Old May 25, 2007 | 11:36 PM
  #10  
RamWheelsBy4's Avatar
Registered User
 
Joined: Aug 2004
Posts: 3,697
Likes: 1
From: Houston, TX
Mods in my signature.

Smarty Moderate TM SW #8, TST 05tt 4/1, EZ on 2 583hp/1019tq.
Reply
Old May 25, 2007 | 11:41 PM
  #11  
RamNu2's Avatar
Registered User
 
Joined: Feb 2006
Posts: 508
Likes: 0
From: Vandalia, Il
See sig.......
Reply
Old May 26, 2007 | 06:09 AM
  #12  
tritont's Avatar
Banned
 
Joined: Dec 2006
Posts: 1,806
Likes: 0
From: NC
sig mods have changed but, with the stock turbo and tranny, running the Smarty on Moderate #7 these were the results......

Blue line is the Smarty and the Red is with the TST on....

TC started slipping bad on the TST

Reply
Old May 26, 2007 | 08:54 AM
  #13  
swansong04's Avatar
Registered User
 
Joined: Aug 2004
Posts: 420
Likes: 0
From: FRASER VALLEY B.C.
451..4 hp
1039 ft pounds of tq (approx)
see sig for mods

Gary
Reply
Old May 26, 2007 | 09:53 AM
  #14  
donnee's Avatar
Registered User
 
Joined: Sep 2005
Posts: 653
Likes: 0
From: Simi Valley, Calif.
I feel like Im wastin my time by posting this but the man did ask.
Bone stock 05
284 HP 523 TQ.
Reply
Old May 26, 2007 | 10:31 AM
  #15  
$oC@l CTD's Avatar
Banned
 
Joined: Feb 2007
Posts: 854
Likes: 0
From: Manassas, VA
424hp/879tq on a Mustang. According to the Mustang operator, I would have seen approx. 500hp/1050tq on a Dynojet (says that Mustangs traditionally read about 20% lower than Dynojets)

Hot edge on level 6/Puck on 90hp setting/K&N CAI/Silverline turboback exhaust...everything else stock.
Reply



All times are GMT -5. The time now is 01:44 PM.