If you have the Commander plugged in just hit the Up or Down buttons on the Commander and it will change the power levels. If you look on the right hand side of the display where the arrows are you will see a number (probably a 0 right now) in the middle. When you push the up button there will be a quick flash icon come up and say "Level1" and the power level icon will then change to correspond to the button pushes. You can go up or down whenever you want.

 

Outstanding........Doesn't get any better than that for service.
Thanks qzilla.

 

Thanks Q for the response, I also got a response via Email from your tech department. He said it clearly "There is no datalink plug on an 06+ Dodge".

I got it installed this morning took a total of 42 minutes. Hardest part was trying to cut the second slit in the boot under the dash, not much room to work with.

Haven't test drove it yet, will report back after lunch.

 

Well, at least the instructions were clear.

 

Okay, here we go.

I let her get fully warmed up as usual...I skipped 30 because well 30 is for , set it at 60, nice increase, nothing to be scared of, but overall probably the perfect setting for daily drivers who want just a little more oomph. I came around the long way so I could take the freeway passed my office and then could turn around and come back. Again on 60 to get on the freeway, noticeable difference in acceleration however cars ahead of me were in my way. I exited the freeway swung around to get back on and flipped it to 100, 1/2-3/4 pedal, no traffic ahead but smoke pouring out like I was on fire! Too scared to hit full throttle on this setting with mine being stock and all. I swore I heard the engine asking for more Dilithium Crystal! As I yelled back, I'm given her all I can! Well, maybe not...but it sure was fun.