i did a 35 sec. recording on starscan with quad race on level 1 at full throttle all readings are what i found at max
starscan read
torque output 570 lbft
boost pressure 38.65
fuel pressure 18154
trans temp 178.56
engine coolant temp 200.53
final timing 8

commander read
egt 1221
boost 40
trans 158
inj. pressure 25042
coolant 198

does quad fool computer as far as fuel pressure and timing?

 

Yup, the timing and anything having to do with fueling will not be right on the starscan.

Looks pretty good other than that. Remember that things like the transmission are recorded at different points so it is to be somewhat expected for them to be different.

The coolant is close than I thought it would be since the starscan reads the bus and the ECM takes coolant and averages it, in other words it is really slow!

 

yea sorry i didnt mention that the tranny sensor on my commander is not directly in the fluid like the pcm