3rd Gen High Performance and Accessories (5.9L Only) Talk about Dodge/Cummins aftermarket products for third generation trucks here. Can include high-performance mods, or general accessories. THIS IS FOR THE 5.9L ONLY!

need more hp

Thread Tools
 
Search this Thread
 
Old Aug 2, 2010 | 01:44 PM
  #1  
59c's Avatar
59c
Thread Starter
Registered User
 
Joined: Jul 2010
Posts: 68
Likes: 0
From: belairmd
need more hp

I have a 06 with edge juce with attitude and 165 air dog . A new tranny is on the wat too .I was thinking of adding a smarty or injectors . I am looking to make 600hp . What do you guys think
Reply
Old Aug 2, 2010 | 08:40 PM
  #2  
1985cucv's Avatar
Registered User
 
Joined: Apr 2008
Posts: 1,960
Likes: 1
From: wisconsin
smarty will get you close on an 06 but you will need injectors and first off buy a turbo!, and headstuds and mainly a trans!
Reply
Old Aug 3, 2010 | 01:01 PM
  #3  
59c's Avatar
59c
Thread Starter
Registered User
 
Joined: Jul 2010
Posts: 68
Likes: 0
From: belairmd
I was looking at the silver bullet 62 or the bd super b special
Reply
Old Aug 3, 2010 | 02:19 PM
  #4  
madhat's Avatar
Administrator/Jarhead
15 Year Member
 
Joined: Jun 2006
Posts: 14,965
Likes: 19
From: Jacksonville, NC
Do a stocker over a S4xx... It's only a little more, it'll make you happier...
Reply
Old Aug 3, 2010 | 03:34 PM
  #5  
59c's Avatar
59c
Thread Starter
Registered User
 
Joined: Jul 2010
Posts: 68
Likes: 0
From: belairmd
what do you mean do a stocker
Reply
Old Aug 3, 2010 | 03:38 PM
  #6  
madhat's Avatar
Administrator/Jarhead
15 Year Member
 
Joined: Jun 2006
Posts: 14,965
Likes: 19
From: Jacksonville, NC
Stock turbo over a S400, or bigger (not much)

Something like this... Third one down...


http://www.wickeddiesels.com/id6.html

http://www.wickeddiesels.com/imageli...et=tlx_picymw5
Reply
Old Aug 3, 2010 | 04:48 PM
  #7  
rock crawler's Avatar
Registered User
15 Year Member
 
Joined: Nov 2006
Posts: 749
Likes: 0
From: Texas
Originally Posted by 59c
I have a 06 with edge juce with attitude and 165 air dog . A new tranny is on the wat too .I was thinking of adding a smarty or injectors . I am looking to make 600hp . What do you guys think
59c, look at my signature. This is everything I have so far, and with the Smarty-TNT I'm running 575 HP. Looks like water/methanol injection should put me right at 600 HP. Just something to see as far as a list of parts. Have fun spending LOTS of dough! Once you're bit, there is no going back. BTW, I had the Edge and it was ok but got hot way too fast. Smarty-POD all the way.
Reply
Old Aug 3, 2010 | 08:35 PM
  #8  
59c's Avatar
59c
Thread Starter
Registered User
 
Joined: Jul 2010
Posts: 68
Likes: 0
From: belairmd
sounds like I have a lot to learn when it comes to turbos
Reply
Old Aug 3, 2010 | 10:33 PM
  #9  
madhat's Avatar
Administrator/Jarhead
15 Year Member
 
Joined: Jun 2006
Posts: 14,965
Likes: 19
From: Jacksonville, NC
So do I, man, so do I.
Reply
Old Aug 4, 2010 | 12:19 AM
  #10  
SMKHZRD's Avatar
Registered User
 
Joined: Oct 2008
Posts: 226
Likes: 0
heck ya wicked's stocker over s400 is good set up buddy it will treat u well
Reply
Old Aug 4, 2010 | 07:52 AM
  #11  
59c's Avatar
59c
Thread Starter
Registered User
 
Joined: Jul 2010
Posts: 68
Likes: 0
From: belairmd
looks like I could upgrade the stock turbo to the s300 when I want to make more hp. Might be the way to go even though I was not looking at twins.
Reply
Old Aug 4, 2010 | 01:02 PM
  #12  
dieseloutlaw1's Avatar
Registered User
 
Joined: Jan 2007
Posts: 136
Likes: 0
From: Wake Village, Tx
It always starts that way... First it's a programmer, then you need a tranny, then you say, huh I've got a built tranny, I could use more power now and the next thing you know you've got a twin turboed monster!!! You won't regret it, I love my twins!! 1200* is as hot I've seen towing or when killing ricers, Z's or mustangs.
Reply
Old Aug 4, 2010 | 02:27 PM
  #13  
59c's Avatar
59c
Thread Starter
Registered User
 
Joined: Jul 2010
Posts: 68
Likes: 0
From: belairmd
I have always wanted a high horse power truck It just seams that now I will have the cash to make it happen. do you thinkm it will still be reliable at the 550-600 hp range
Reply
Old Aug 4, 2010 | 05:52 PM
  #14  
soulezoo's Avatar
DTR 1st Sergeant
 
Joined: Apr 2007
Posts: 5,530
Likes: 6
From: Applegate, CA
Originally Posted by dieseloutlaw1
It always starts that way... First it's a programmer, then you need a tranny, then you say, huh I've got a built tranny, I could use more power now and the next thing you know you've got a twin turboed monster!!! You won't regret it, I love my twins!! 1200* is as hot I've seen towing or when killing ricers, Z's or mustangs.
That is how it worked out for me...
Reply
Old Aug 4, 2010 | 07:22 PM
  #15  
rip 112's Avatar
Registered User
 
Joined: Mar 2007
Posts: 4,813
Likes: 2
From: LaGrange, Texas
600hp your looking at needing a turbo in the 62/71 or 64/71 range or twins, tranny is a most definite necessity, injectors and some slight cp3 modding like the bag of parts kit or some diy mods.. The Edge is a hot fueler, so IMO I would either get the hot unlock or swap it for a smarty.
Reply



All times are GMT -5. The time now is 10:09 AM.