Mega Cab dually pics
coreydr2003..........I found one of the pics I was looking for today under the lifted dually thread.....how much of a lift did you put on the new mega cab?
Heston....looks like there is more tire gap on the rear with your new set up vs the pic Tee posted. ??
Heston....looks like there is more tire gap on the rear with your new set up vs the pic Tee posted. ??
Those are the Dune Grapplers by Nitto. They were 325/70r's i think but not sure. I had them for about 15K and blew out a front left, my dad needed new tires so he bought one extra dune grappler and took my tires... well he ended up blowing out 3 more... so i don't have much to compliment on for the grapplers. Maybe other people have had different luck but mine was pretty much all bad.
Yes i do have rear spacers though.
Thats right because the 325 nittos are wider and shorter than the toyos i have on now. They wasn't any rubbing though.
Wish i knew exatly what inch the spacers i have are so i could share. sorry
Yes they clear fine. I ran them for a while with just the stock height but now i have a 2 in leveling kit in the front. there wasn't any rubbing or anything in the front though.
Don't take my word for it but i don't think you'll need spacers in the back for a 285 and maybe not a 295 if you get it in a 75r or 80r thats taller and skinnier
Yes i do have rear spacers though.
Wish i knew exatly what inch the spacers i have are so i could share. sorry
Don't take my word for it but i don't think you'll need spacers in the back for a 285 and maybe not a 295 if you get it in a 75r or 80r thats taller and skinnier
Thread
Thread Starter
Forum
Replies
Last Post
banks twinram
3rd Generation Ram - Non Drivetrain - All Years
7
Sep 22, 2011 07:49 PM
chancey
3rd Generation Ram - Non Drivetrain - All Years
12
Nov 8, 2010 07:18 PM
mcolectd
3rd Generation Ram - Non Drivetrain - All Years
1
Sep 19, 2010 08:46 PM
jimbo486
3rd Gen Engine and Drivetrain -> 2003-2007
13
Nov 5, 2009 09:17 AM
StealthDiesel
3rd Gen Engine and Drivetrain -> 2007 and up
17
Nov 7, 2007 07:35 PM



