Just dropped truck of at performance shop their exhaust recommendation surprised me!
3/04 California (and four other states) have a cat on the 235hp model. I have one.
I bought my Silverline today...ripped out the old system from turbo back using the new sawsall I also picked up this morning. About a half hour ago I started hanging the new stuff - muffler and tail pipe fit fine, and with a little reforming, the extensions looked to fit ok. Then I went to hang the new down pipe. Got it up in there, and thought something looked funny - oh, the band clamp. Stuck it up there and it still looked funny. The flange on the new down pipe was about 1/2" dia smaller than the cast elbow flange! Aggggghhhhhhh!
I looked across at my former artwork (the saw cut between the kitty and the old down pipe), and of course its too short now to be salvaged.
I dont know if the shop sold me the wrong kit, but its obviously for an 03-04. The shop is @20 miles from me, I have no other vehicle right now, as the DW is two states East. Hmmmmmm, why does this always seem to happen......
Anyone have a good solution?
I looked across at my former artwork (the saw cut between the kitty and the old down pipe), and of course its too short now to be salvaged.
I dont know if the shop sold me the wrong kit, but its obviously for an 03-04. The shop is @20 miles from me, I have no other vehicle right now, as the DW is two states East. Hmmmmmm, why does this always seem to happen......
Anyone have a good solution?
Thread
Thread Starter
Forum
Replies
Last Post
kdbvulcan
3rd Gen High Performance and Accessories (5.9L Only)
3
Dec 13, 2008 11:17 PM
CG98x
3rd Gen High Performance and Accessories (5.9L Only)
24
Aug 15, 2007 11:03 AM
NCYZ1V
3rd Gen High Performance and Accessories (5.9L Only)
5
Jul 19, 2007 01:32 PM
dzlfarmboy
Performance and Accessories 2nd gen only
2
Mar 16, 2007 06:38 PM
dma251
12 Valve Engine and Drivetrain
2
Mar 22, 2004 11:47 AM



