Installed cheap fuel pressure gauge today.
#1
Registered User
Thread Starter
Join Date: Nov 2003
Location: NW Ga.
Posts: 141
Likes: 0
Received 0 Likes
on
0 Posts
Installed cheap fuel pressure gauge today.
I installed a cheap 15 psi Mr Gasket gauge today. I just removed the lower rubber hose between the filter and the CP3 lines and put a T in and ran the gauge inside the truck. I used 300 pound hose and just tie wrapped the gauge at the bottom of the dash on the left side as a temporary deal. I plan on buying an Isspro white face F/P gauge and the SRT10 A pillar. I know that it is not a great idea to do this without a isolator and thus the 300 pound hose. Any way just got home and with the truck off and just the lift pump running I see 7psi, running at idle I see about 5.5psi, and wot I see it drop to 3 to 3.5. Have not looked with the TST on in any setting yet. I am planning on doing Superduty's Walbro F/P deal. I just wanted to see what the pressure is stock. Hey Superduty is this the correct place to monitor Fuel pressure. It made sense to me. Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
dodgeguy71
Performance and Accessories 2nd gen only
17
01-19-2012 12:52 AM
Gman_dodge
Performance and Accessories 2nd gen only
27
10-02-2007 04:27 PM
Spooler
3rd Gen Engine and Drivetrain -> 2003-2007
4
02-12-2006 11:43 AM