Whats the highest HP that has been recorded with stock (non-retorqued) head bolts???

Also give tuning info if avail.

I am curious as to how well these things actually work, so far I have been very impressed, give your thoughts!!!

 

Our 2005 did 565hp with stock head bolts. It had our towing twins a TST Powermax, an Edge EZ and a small set of sticks. 65psi of boost on a fairly regular basis.

 

Sounds good for twins!!! Would you happen to know your DP at 65-70 psi???

 

I dont remember the exact number but with the towing twins being close to their limit it would have been pretty close to 1:1.

 

I know someone who just put down 750+hp and ran a 11.44 on stock head bolts using the Garmon sequence, and he's running a 62/71/13ss over a s480.

 

This truck wouldn't be the Garmon built "Interceptor" would it???

 

What about n2o with stock head bolts and stock head gasket, about a 200 shot.

Joe

 

Say it ain't so Joe??? Going the way of the spray???

I think with your WG set to open soon enough and you could stay on top of DP good enough then I think a 200 shot might be ok, but keeping DP in check is the key!!!

 

That is what the external gate is for!!!!!!!!!

 

Yep, and I see he answered you on CompD, one bad truck for sure.